Item: VPLAT0013ABP Matches: LR4
We have specially-developed this trailer wires package for LR4 automobiles. This package effortlessly converts their Rover wires connect to either a standard ‘Flat 4’ united states specification connect or 7-way connect (both fittings incorporated!). Our very own top quality use packages include reliable and cost a portion of the actual forms. They highlight a rubber connect cover to protect the outside trailer plug through the details and simple plug-and-go construction suggests they can be setup in minutes.
Section a part of KitVPLAT0013ABP:
- 4 ea. M5 x 0.8mm x 40mm machine screws
- 1 ea. YMZ500770ABP harness with truck fittings
- 1 ea. YMZ500502ABP harness with vehicle connectors
- 5 cable links
Resources Required For KitVPLAT0013ABP:
- Phillips Head Screwdriver
- 10 mm wrench
1. eliminate the left taillight system by eliminating the two screws. The end light will accomplish. (See photo1)
2. Remove the truck Connector Access panel. (identify photo2)
3. The VPLAT0013ABP wires Harness will come in 2 areas. One spend the the fittings that connect inside Trailer, therefore the next spend the the connections that plug inside car.
4. make spend the the truck fittings and give the harness through opening inside bumper (the opening regarding remaining). Maneuver the truck connector through beginning. (It may take some twisting and turning, nevertheless will fit.)
5. Secure the connector using the 4 screws supplied. (See photograph 3.)
6. Remove the accessibility panel in the remaining rear of luggage section of the automobile in order to find the 2 gray fittings toward the top of the open neighborhood while the round black colored grommet toward the bottom. (discover picture 4 and picture 4a.)
7. The grey fittings take place set up by 2 “dummy” connections. Draw each of the fittings off their mounting brackets and remove the “dummy” fittings. Get rid of the rubber grommet also. (discover photograph 5.)
8. Look for the next rubber grommet behind the end light assembly and take off they. (discover pic 6.)
9. supply the wiring harness aided by the vehicle connections through the 2 gaps inside vehicle, making sure that the grey connections that may connect into the vehicle tend to be dealing with toward the within. (discover picture 7.)
10. Once the cable tv is just how through all of the holes from inside the car, drive the grommets into place.
11. Plug the 2 grey connections associated with the truck wiring harness to the gray plugs on the car harness and click into put on the brackets.
12. take away the addict from the grounding stud (10mm) and protect the ring lug for the truck wiring funnel for this stud. Protected the utilize toward vehicle using the fir-tree cable tv tie-on the funnel.
13. take away the free tire, and that means you has space to perform the cable tv underneath the auto.
14. work the cable over the orifice under the car immediately behind the bumper and steer the conclusion utilizing the connector such that it arrives from inside the starting the place you eliminated the end light assembly. (read photograph 8.)
15. Once you can easily see the connectors in the area behind the tail light (read photo 9), hook these to the use you given from the automobile. (See photo 10.)
16. make sure the connections are entirely sitting (you should hear simple once the connectors is totally involved). Force the white plastic locking tabs toward lock in the connectors. (read photograph 11.)
17. Wrap these connectors utilizing the foam given so they really cannot rattle about in your neighborhood underneath the tail light system.
18. Secure the truck connector
19. examination installing the device.
20. Reinstall the spare tire, end light system, truck access section while the access screen in left back of the cargo section of the automobile.